Sharp MX-M200D Software Setup Manual page 36

TROUBLESHOOTING
5
Configure the image of the machine.
An image of the machine is formed in the printer
driver configuration window based on the options
that are installed.
(1) Select the options that are installed on the
machine.
(2) Click the [OK] button.
To cancel the image settings, click the
Note
[Cancel] button.
6
Click the [OK] button in the printer
properties window.
If automatic configuration fails, Click the [Set Tray Status] button and select the size of paper that is loaded in
Note
each tray.
• Select a tray in the "Paper source" menu, and select the size of paper loaded in that tray from the "Set Paper
Size" menu.
34
(1) (2)