Sharp MX-M200D Software Setup Manual page 11

9
The files required for installation of
the MFP driver are copied (if "MFP
Driver" was selected in Step 8).
Follow the on-screen instructions.
When you are asked how the printer is
connected, select [Connected to this
computer] and click the [Next] button.
• If you are using Windows Vista and a
Caution
security warning window appears, be sure
to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a
warning message appears regarding the
Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
When "The installation of the SHARP software is
complete" appears, click the [OK] button.
10
If you wish to install Button Manager,
Sharpdesk, or the PC-Fax driver, click
the [Utility Software] button in step 8.
11
Click the [Button Manager] button, the
[Sharpdesk] button, or the [PC-Fax
Driver] button.
In the port selection screen that appears when
the PC-Fax driver is being installed, select the
same port as the MFP driver that is already
installed.
When a message appears prompting you to
Note
connect the USB cable, click the [OK]
button.
INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)
12
When installing is finished, click the
"Close" button.
Caution
A message will appear instructing you to connect
the machine to your computer. Click the "OK"
button.
Note
13
Make sure that the power of the
machine is turned on, and then
connect the USB cable (p.37).
Windows will detect the machine and a Plug and
Play window will appear.
14
Follow the instructions in the Plug
and Play window to install the driver.
Follow the on-screen instructions.
Caution
This completes the installation.
• If you installed the MFP Driver, see "CONFIGURING
THE PRINTER DRIVER (Windows environment)"
(page 33) to configure the printer driver settings.
• If you installed Button Manager, see "SETTING UP
BUTTON MANAGER" (page 11) to set up Button
Manager.
• If you are using Windows Vista and a
security warning window appears, be sure
to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a
warning message appears regarding the
Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
After the installation, a message prompting
you to restart your computer may appear. In
this case, click the "Yes" button to restart your
computer.
• If you are using Windows Vista and a
security warning window appears, be sure
to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a
warning message appears regarding the
Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
1
9