Copying On Special Paper (Bypass Copy) - Sharp MX-7001N Quick Start Manual

COPYING ON SPECIAL PAPER
(Bypass Copy)
Use the bypass tray to copy on special media such as heavy paper,
envelopes, and tab paper.
This section explains how to load A4 heavy paper in the bypass tray.
The side to be scanned must be face up!
The side to be
copied on must
be face down!
Colour Mode
Full Colour
Exposure
1. 2.
A4 A4
Auto
3. A3
4. B4
Copy Ratio Original Paper Select
100%
Auto Auto
A4
Plain
(1)
Paper Select
Paper Tray
1. A4 2. A4
Plain Plain
3. A3
Plain
4. B4
Plain
Paper Select
Bypass Tray Type/Size Setting
Select the paper type.
Plain Pre-Printed Recycled
Pre-Punched Colour Heavy Paper 1
Thin Paper Labels Transparency
Envelope
Heavy Paper 1: 106 - 209 g/m 2 (28+ - 56 lbs.)
Heavy Paper 2: 210 - 256 g/m 2
(56+ - 68 lbs.)
1
2
3
Special Modes
2-Sided Copy
Plain
A4
Output
File
Quick File
A4
OK
Bypass Tray
A4
Plain
(2)
Cancel
1
2
Letter Head
Heavy Paper 2
(3)
Tab Paper
Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
Insert paper in the bypass tray.
Select settings in the touch panel.
(1) Touch the [Paper Select] key.
(2) Touch the paper type key of the bypass tray.
Here the [Plain] key has been touched.
(3) Touch the [Heavy Paper 1] key or [Heavy Paper
2] key.
If the weight of the loaded paper is 106 g/m
209 g/m
2
(28 lbs. to 56 lbs.), touch the [Heavy Paper 1]
key. If the weight is 210 g/m
68 lbs.), touch the [Heavy Paper 2] key.
Original Copy on heavy paper
2
to
to 256 g/m
2 2
(56 lbs. to
27