Part Names And Functions - Sharp MX-7001N Quick Start Manual

PART NAMES AND FUNCTIONS

Exterior
When a finisher
(peripheral device)
is installed.
(1) Saddle stitch finisher / finisher*
This can be used to staple output. The saddle stitch
finisher can automatically staple output at the centre
line and fold the pages to create a pamphlet.
(2) Punch module*
This is used to punch holes in output.
(3) Inserter*
This inserts covers and inserts into copy and print
output. Paper loaded in the inserter can also be
stapled.
(4) Automatic document feeder
This automatically feeds and scans multiple originals.
Both sides of 2-sided originals can be scanned at
once.
(5) Document feeder tray
Place the originals in this tray when using the
automatic document feeder.
(6) Front cover (upper)
Open to replace a toner cartridge.
(7) Front cover (lower)
Open to power on the machine.
(8) Operation panel
(9) Right Tray
Output can be delivered to this tray.
8
(1) (2) (3) (4) (5)
(11)
(10) Document glass
(11) Tray 1
(12) Tray 2
(13) Tray 3
(14) Tray 4
(15) Tray 5 (when a large capacity tray is installed)*
(16) Output tray (centre tray)
(6) (7) (8) (9)
(12) (13) (14) (15)
Use this to scan a book or other original that cannot
be fed through the automatic document feeder.
This holds paper. Up to 1200 sheets of paper can be
loaded.
This holds paper. Up to 800 sheets of paper can be
loaded.
This holds paper. Up to 500 sheets of paper can be
loaded.
This holds paper. Up to 500 sheets of paper can be
loaded.
This holds paper. A4 or 8-1/2" x 11" paper can be
loaded in the large capacity tray (MX-LCX2). Up to
3500 sheets of paper can be loaded.
Paper from B5 to A3W (8-1/2" x 11" to 12" x 18") can
be loaded in the large capacity tray (MX-LCX3). Up to
3000 sheets of paper can be loaded.
Copy jobs and print jobs are delivered to this tray.
(When a finisher or saddle stitch finisher is installed,
the output tray (centre tray) cannot be used.)
(10)
(16)