Operation; Main Unit Operation - Sharp KC-930EKW Operation Manual

OPERATION

MAIN UNIT OPERATION

Fan Speed Indicator Lights Fan Speed Indicator Lights
Plasmacluster Ion Indicator Light Plasmacluster Ion Indicator Light
Please select either Humidify mode or Clean air mode operation when operation when using.
Humidify mode : Fill Water Tank.(See E-10)
Clean Air mode : Drain Water Tank and Humidifying Tray.
AUTO operation
The fan speed is automatically switched
(between HIGH and LOW) depending on the
amount of impurities in the air. The sensors
detect impurities for effi cient air purfi cation.
MAX operation
The unit will operate at a fan speed
of MAX.
Power ON/OFF Button
• Press to start operation (short beep) and stop operation
(long beep)
• Plasmacluster Indicator Light and Fan Speed Indicator
Light turn on/off.
• Unless the power cord has been unplugged, the opera-
tions starts in the previous mode it was operated in.
MODE Button
• Press the MODE Button to select the desired fan speed.
Indicator Lights will show the fan speed currently selected.
• The operation mode can be switched as below.
LOW operation
The unit will operate quietly using
minimal air intake.
MEDIUM operation
The unit will operate at a fan speed
of MEDIUM.
Plasmacluster Ion ON/OFF Button
Press the Plasmacluster Ion ON/OFF Button to turn
Plasmacluster Ion Mode ON and OFF.
When Plasmacluster Ion is ON, the Plasmacluster Ion
Indicator Light will turn on.(blue)
E-8
MODE Button
MODE Button
Plasmacluster Ion Plasmacluster Ion
ON/OFF Button
ON/OFF Button
POWER ON/OFF
POWER ON/OFF
Button
Button