Maintenance; After Finishing A Recording - Samsung SCD77 Owner's Instruction Book

ENGLISH

Maintenance

After finishing a recording

At the end of a recording you must remove the power source.
Leaving the battery pack on the camcorder after completing recording will reduce battery life.
After completing a recording session
1. Slide the EJECT switch in the direction of the arrow
Opening the cassette door ejects the tape automatically.
Wait until the tape is completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free environment.
Dust and other foreign materials can cause image degradation.
3. Set the power switch to OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
When connecting a power supply, separate it in reverse order by referring to page 21.
Hold down the BATT. RELEASE button and slide the battery pack in the direction of the arrow.
88
1
2
3
OFF
4
4