Advanced Recording
Audio dubbing
The AUDIO DUBBING function only works in PLAYER Mode.
You can add sound to the original sound on a pre-recorded tape, recorded in the SP mode with 12bit sound.
Use the internal, or an external microphone.
The original sound will not be erased.
Dubbing sound with microphone
1. Set the camcorder to PLAYER mode
If you want to use the external microphone, connect the microphone
to the external MIC input on the camcorder.
2. Press
(PLAY/STILL) button and find the start position of the scene to be dubbed.
3. Press
(PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
A.DUB will be displayed in the LCD.
The camcorder is in a ready-to-dub state.
5. Press the
(PLAY/STILL) button to start.
Press the
(STOP) button to stop the dubbing.
-
Note
You can not dub sound on a pre-recorded tape recorded in LP mode or 16 bit mode.
ENGLISH
START/
WIDE
STOP
PHOTO
DISPLAY
SELF
ZERO
A.DUB
TIMER
MEMORY
TELE
A.DUB
PLAY/
STILL
STILL
X2
SLOW
F.ADV
57