Siemens Simatic ET 200SP Manual page 15

Product overview
3.2 BusAdapter BA-Send 1xFC
Properties
The module has the following technical properties:
• BusAdapter for the direct connection of ET-Connection
• Connects the interface module via ET-Connection with the ET 200AL I/O modules
• Supports all ET 200AL I/O modules
The module supports the following functions:
• Identification data I&M 0 to 3. See system manual ET 200SP Distributed I/O System
(https://support.industry.siemens.com/cs/ww/en/view/58649293).
Maximum configuration
• 16 ET 200AL I/O modules
• 15 m bus cable between BusAdapter BA Send and the first ET 200AL I/O module and
between two ET 200AL I/O modules.
• Supported functions:
1)
Accessories
The following components must be ordered separately:
• Labeling strips
• Reference identification label
• Stripping tool for ET-Connection
• Bus cables for ET-Connection
See also
You will find additional information on accessories and the other components in the system
manuals ET 200AL Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/89254965) and the Accessories/Spare
parts section of the ET 200SP Distributed I/O System
(https://support.industry.siemens.com/cs/ww/en/view/58649293) system manual.
14
Function
Isochronous mode
Configuration control
Shared device
PROFIenergy
System redundancy S2
With IM 155-6 PN/3 HF and IM 155-6 PN/2 HF V4.2 or higher
Mixed configuration
ET 200SP
IM CPU
⑥ --
⑥ ⑥
⑥ ⑥
⑥ --
● --
1
Equipment Manual, 11/2020, A5E33344611-AD
ET 200AL I/O modules on
ET-Connection
--
⑥
⑥
⑥
●
1
Mixed configuration