Table of Contents
Advertisement
Dolly movement - ENG studio version only
The wheels on the ENG studio dolly can be locked in the straight-ahead position or set to castor
freely. The castor/lock change over is effected by spring-loaded track lock pins
assembly. The pins on the folding legs
knob. To engage or disengage a pin, pull it up against the spring and turn through 90°. The pin
will only engage with the wheel when the wheel is properly aligned. This arrangement provides
castor, track and steer motion.
Castor motion
For castor motion, disengage all three track locks. The dolly can now be moved freely in any di-
rection.
Tracking motion
For tracking motion, engage all three track locks. The dolly can now track backwards and forwards
in a straight line.
Steer motion
For steer motion:
Position the dolly so that the fixed leg
Disengage the red track lock.
Engage the black track locks on the folding legs (7).
With the fixed leg of the dolly facing forwards the dolly can now be moved with a `steering-
type' motion.
(7)
have black knobs and the pin on the fixed leg
(2)
(with the red knob) is in the direction of travel.
(4)
on each wheel
(2)
a red
11
Advertisement
Table of Contents
