HP ENVY 15 Maintenance And Service Manual page 48

Hide thumbs Also See for ENVY 15:

Table of Contents

Release the display panel cable (1) and the power connector cable from the retention clips (2) built into the

left fan.

Release the retention tape (1) that secures the left fan cable to the system board.

Disconnect the left fan cable (2) from the system board.

Remove the three Phillips M2.0×4. screws (3) that secure the left fan to the system board.

Remove the left fan (4).

Reverse this procedure to install the fans.

Chapter 5 Removal and replacement procedures

Table of Contents