HP ENVY 15 Maintenance And Service Manual page 38

Table of Contents

Advertisement

5.
Remove the three Torx5 M2.0×4.0 screws (1) and the two Torx5 M2.0×2.5 screws (2) that secure
the bottom cover to the keyboard/top cover.
6.
Use a thin plastic tool (1) to separate the rear edge (2) of the bottom cover from the keyboard/top cover.
7.
Remove the bottom cover (3).
Reverse this procedure to install the bottom cover.
28
Chapter 5 Removal and replacement procedures

Advertisement

Table of Contents
loading

Table of Contents