Product Description - Dantherm HCV 4 Installation Manual

Product description

Introduction This section provides a description of the unit.
The use of the HCV The HCV is used for domestic ventilation. The unit supplies fresh, heated outdoor air
through the unit to the house. Polluted and warm extract air is used to heat up the out-
door air by means of heat recovery.
Illustration, internal The illustration shows the different parts of the unit seen from within:
Parts The table lists the main parts in the unit:
No.
1
2
3
4
5
6
7
Part
Heat exchanger
Electrical connections (located at
the bottom of the HCV 5)
Temperature sensor, T2
Temperature sensor, T3
Humidity sensor
Temperature sensor, T1
Exhaust filter (G4)
No. Part
8 Air supply filter (G4/F7)
G4 filter is standard, F7 pollen filter is an op-
tional extra
9 Temperature sensor, T4
10 Controls
11 Reset button for filter timer
12 Supply air fan module
13 Extract air fan module
14 Drain/drip tray
15 Bypass (only HCV 5)
Continued overleaf
3