1065 System Board - IBM PS/2 90 XP 486 Hardware Maintenance Reference

14.13 1065 System Board

Cover (1005)
Air baffle (1015)
Hard disk drives (1030)
Adapters (1035)
Memory-riser-card bracket
Memory-riser cards
Power supply (1055)
Disconnect any cables necessary for removal.
Notes:
1. Transfer the memory and riser cards to the replacement system board.
After you replace the system board, run Restore configuration from the
hard disk drive. Reset the start-up sequence.
IBM PS/2 Model 90 XP 486 and 95 XP 486 HMR
1065 System Board
(1045)
(1050)
PICTURE 25
¦ Copyright IBM Corp. 1990, 1992
14.13 - 1