14.12 1060
Battery
Cover
(1005)
Air baffle
(1015)
Adapters
(1035) (from system-board slots J1, J3, J4, and J6)
Disconnect any cables necessary for removal.
CAUTION:
The lithium battery presents a fire, explosion, or severe burn risk.
not recharge it, disassemble it, heat it above 100°C (212°F), incinerate
it, or expose its cell contents to water.
required by local ordinances or regulations.
FRU No. 33F8354 might result in ignition or explosion of the battery.
Note:
After you replace the battery, run Automatic configuration from the
hard disk drive.
IBM PS/2 Model 90 XP 486 and 95 XP 486 HMR
1060 Battery
Dispose of the battery as
Use of a battery other than
PICTURE 24
¦ Copyright IBM Corp. 1990, 1992
14.12 - 1
Do