IBM PS/2 90 XP 486 Hardware Maintenance Reference page 82

14.10 1050 Memory Riser Card
Cover (1005)
Memory-riser-card bracket
Disconnect any cables necessary for removal.
Notes:
1. If memory is added or removed, run Automatic configuration from the
hard disk drive.
2. If memory is replaced because it failed, run the advanced diagnostic
memory test. Otherwise the system might not recognize the replacement
memory.
IBM PS/2 Model 90 XP 486 and 95 XP 486 HMR
1050 Memory Riser Card
(1045).
PICTURE 22
¦ Copyright IBM Corp. 1990, 1992
14.10 - 1