Loading The Manual Feeder; Setting The Paper Size And Type - Lexmark C3224 Quick Reference

Loading the manual feeder

1
Adjust the guide to match the size of the paper that you are
loading.
2
Load a sheet of paper with the printable side faceup.
•
Load letterhead with the printable side faceup and the top
edge entering the printer first for one ‑ sided printing.
•
Load letterhead with the printable side facedown and the
top edge entering the printer last for two ‑ sided printing.
•
Load envelope with the flap side down and against the right
side of the paper guide.
3
Feed the paper until its leading edge gets pulled in.
Notes:
•
To avoid paper jams, do not force paper into the manual
feeder.
•
Before loading another sheet, wait for a message to
appear on the display.

Setting the paper size and type

1 From the control panel, navigate to:
Settings > Paper > Tray Configuration > Paper Size/Type >
select a paper source
For non-touch-screen printer models, press
through the settings.
2 Set the paper size and type.
4
Connecting a mobile device to the
printer
Before connecting your mobile device, make sure to do the
following:
Enable Wi ‑ Fi Direct in the printer. From the control panel,
•
navigate to: Settings > Network/Ports > Wireless > Enable
Wi ‑ Fi Direct.
•
Show the preshared key (PSK) on the Network Setup Page.
From the control panel, navigate to: Settings > Network/Ports
> Wi ‑ Fi Direct > Show PSK on Setup Page.
•
Print the Network Setup Page. From the control panel, navigate
to: Settings > Reports > Network > Network Setup Page.
For non ‑ touch ‑ screen printer models, press
through the settings.
Connecting using Wi‑Fi Direct
1
From the mobile device, go to the settings menu.
Enable Wi ‑ Fi, and then tap Wi ‑ Fi Direct.
2
3
Select the printer SSID.
4
Confirm the connection on the printer control panel.
Connecting using Wi‑Fi
1 From the mobile device, go to the settings menu.
Tap Wi ‑ Fi, and then select the printer SSID.
2
Note: The string DIRECT-xy (where x and y are two
random characters) is added before the SSID.
3
Enter the PSK.
Note: The PSK is the password.
Notes:
•
You can change the SSID on the control panel. Navigate to:
Settings > Network/Ports > Wi ‑ Fi Direct > SSID.
•
You can also change the PSK on the control panel. Navigate
to: Settings > Network/Ports > Wi ‑ Fi Direct > Set PSK.
to navigate
to navigate