Loading The Manual Feeder; Setting The Paper Size And Type - Lexmark MB2236 Quick Reference

2
Adjust the paper guides to match the size of the paper that you
are loading.
3 Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown, and
then make sure that the side guides fit snugly against the
paper.
Notes:
•
Load letterhead facedown with the top edge of the
sheet toward the front of the tray for one ‑ sided printing.
•
Load letterhead faceup with the bottom edge of the
sheet toward the front of the tray for two ‑ sided printing.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
5 Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.
9

Loading the manual feeder

1 Open the manual feeder.
2
Adjust the guide to match the size of the paper that you are
loading.
3
Load a sheet of paper with the printable side faceup.
•
Load letterhead with the printable side faceup and the top
edge entering the printer first for one ‑ sided printing.
•
Load letterhead with the printable side facedown and the
top edge entering the printer last for two ‑ sided printing.
•
Load envelope with the flap side down and against the left
side of the paper guide.
Warning—Potential Damage: To avoid paper jams, do not
force paper into the manual feeder.

Setting the paper size and type

1
From the control panel, navigate to:
Settings > Paper > Tray Configuration > Paper Size/Type >
select a paper source