Section 1: General; Pre-Installation Inspection - Emerson EIM HQ Series Installation, Operation And Maintenance Manual

Installation, Operation and Maintenance Manual
VCIOM-15204-EN Rev. 1

Section 1: General

HQ Series electric actuators are design to provide reliable and efficient operation of 90°
quarter-turn valves, dampers, etc.
WARNING
!
Use caution when working in, with, or around valves and actuators. High pressures, forces,
voltages and flammable media can be present.
WARNING
!
Failure to follow instructions for proper electrical wiring, storage, set-up and maintenance
may cause serious injury, damage equipment, or void warranty.
1.1

Pre-Installation Inspection

Verify the actuator nameplate to insure correct model number, torque, operating speed,
voltage and enclosure type before installation or use. It is important to verify that the
output torque of the actuator is appropriate for the torque requirements of the valve and
that the actuator duty cycle is appropriate of the intended application.
General
Section 1: General
May 2020
1