Heart Rate Features; Music Playback Controls; Connecting Bluetooth Headphones; Changing The Audio Mode - Garmin FENIX 6 PRO Series Owner's Manual

5
Select : to open the music playback

Music Playback Controls

0
Select to manage content fr o m some third-party providers.
.r.J
Select to browse the audio files and playlists for the selected
source.
•O
Select to adjust the volume.
►
Select to play and pause the current audio file.
►I
Select to skip to the next audio file in the playlist.
Hold to fast forward through the current audio
I◄
Select to restart the current audio file.
Select twice to skip to the previous audio file in the playlist.
Hold to rewind through the current audio file.
0
Select to change the repeat mode.
X:
Select to change the shuffle mode.

Connecting Bluetooth Headphones

To listen to music loaded onto your fenix device, you must
connect headphones using Bluetooth technology.
1 Bring the headphones within 2 m (6.6
2 Enable pairing mode on the headphones.
3
Hold MENU.
4
Select Music > Headphones > Add New.
5
Select your headphones to complete the pairing process.

Changing the Audio Mode

You can change the music playback mode from stereo to mono.
1 Hold MENU.
2 Select Music > Audio.
3
Select an option.

Heart Rate Features

The fenix device has a wrist-based heart rate monitor and is
also compatible with chest heart rate monitors (sold separately).
You can view heart rate data on the heart rate widget. If both
wrist-based heart rate and chest heart rate data are available,
your device uses the chest heart rate data.
Wrist-based Heart Rate
Wearing the Device
• Wear the device above your wrist bone.
NOTE: The device should be snug but comfortable. For more
accurate heart rate readings, the device should not move
while running or exercising. For pulse oximeter
should remain motionless.
NOTE: The optical sensor is located on the back of the
device.
• See
Tips for E"atic Heart Rate Data, page 13
information about wrist-based heart rate.
• See
Tips for E"atic Pulse Oximeter Data, page 20
information about the pulse oximeter sensor.
• For more information about accuracy, go to
/ataccuracy.
Heart Rate Features
controls. Tips for Erratic Heart Rate Data
these tips.
file.
Viewing the Heart Rate Widget
ft.) of your device.
2
You can broadcast your heart rate data from your fenix device
and view it on paired Garmin devices.
2
You can set up your fenix device to broadcast your heart rate
data automatically when you begin an activity. For example, you
readings, you
can broadcast your heart rate data to an Edge• device while
cycling,
2
for more 4
for more
garmin.com
If the heart rate data is erratic or does not appear, you can try
• Clean and dry your arm before putting on the device.
• Avoid wearing
sunscreen, lotion,
the device.
• Avoid scratching the heart rate sensor on the back of the
device.
• Wear the device above your wrist bone. The device should
be snug but comfortable.
• Wait until
the• icon is solid before starting your activity.
• Warm up for 5 to 10 minutes and get a heart rate reading
before starting your activity.
NOTE: In cold environments,
• Rinse the device with fresh water after each workout.
• While
exercising, use a silicone band.
1 From the watch face, press UP or DOWN to view the heart
rate widget.
NOTE: You may need to add the widget to your widget loop
(Customizing the Widget Loop, page
Press@ to view your current heart rate in beats per minute
(bpm) and a graph of your heart rate for the last 4 hours.
3 Press DOWN to view your average resting heart rate values
for the last 7 days.
Broadcasting Heart Rate Data to Garmin Devices
NOTE: Broadcasting heart rate data decreases battery life.
1
From the heart rate widget, hold MENU.
Select Options > Broadcast Heart Rate.
The fenix device starts broadcasting your heart rate data, and
(cc• appears.
NOTE: You can view only the heart rate widget while
broadcasting heart rate data from the heart rate widget.
3
Pair your fenix device with your Garmin ANT+• compatible
device.
NOTE: The pairing instructions differ for each Garmin
compatible device. See your owner's manual.
TIP: To stop broadcasting your heart rate data, press any
button, and select Yes.
Broadcasting Heart Rate Data During an Activity
or to a VIRB• action camera during an activity.
NOTE: Broadcasting heart rate data decreases battery life.
1 From the heart rate widget,
Select Options> Broadcast During Activity.
3
Begin an activity (Starting an Activity, page
The fenix device starts broadcasting your heart rate data in
the background.
NOTE: There is no indication that the device is broadcasting
your heart rate data during an
If necessary, pair your fenix device with your Garmin ANT+
compatible device.
NOTE: The pairing instructions differ for each Garmin
compatible device. See your owner's manual.
TIP: To stop broadcasting your heart rate data, stop the
activity (Stopping an Activity, page
and insect repellent under
warm up indoors.
33).
hold MENU.
2).
activity.
3).
13