Table of Contents
Advertisement
Quick Links
Product Name: Cross Arm Strap
Instruction Manual
Part #: 10785; 10786; 10787; 10788; 10790; 10791; 10792; 10793; 10794; 10795; 10797; 01641
Do not throw away these instructions!
Read and understand these instructions before using equipment!
1
1
2
2
3 - 4
5
6
7
7
7
8
9 - 10
Advertisement
Table of Contents
Related Manuals for Guardian Fall Protection 10786
Summarization of Contents
Introduction
User Information
Collects user details such as date of first use, serial number, trainer, and user name.
Applicable Safety Standards
Lists compliance with OSHA 1926, OSHA 1910, ANSI Z359.18-2017, and ANSI A10.32-2012 standards.
Worker Classifications
Qualified Person
A person with accredited degree or certification experienced in planning fall protection systems.
Competent Person
An experienced, trained individual assigned by employer to manage fall safety programs.
Authorized Person
A person assigned by employer to work near or be subject to fall hazards.
Product Specific Applications
Personal Fall Arrest
Specifies usage for supporting one PFAS, structure strength requirements, and free fall limits.
Restraint
Outlines use in restraint systems, structure strength, and limitations for preventing fall access.
Limitations
Fall Clearance
Explains the need for sufficient clearance to safely arrest a fall, accounting for various factors.
Swing Falls
Advises minimizing swing fall hazards by working as close to the anchor point as possible.
Compatibility and Anchorage Positioning
Compatibility
Details acceptable and unacceptable connector types to prevent roll-out and ensure secure connections.
Correct Anchorage Positioning
Provides a chart of allowable working zones to reduce swing falls and improper side loading.
Components and Specifications
Product Features
Describes D-ring ends, loop end, Type A connector, temperature rating, and MBS.
Model Variations
Presents a table of part numbers, lengths, and descriptions for different Cross Arm Strap models.
Installation and Use
System Planning & Preparation
Emphasizes selecting compatible components, inspecting the work area, and eliminating swing fall risks.
Installation Procedure
Details how to place, cinch, and connect the Cross Arm Strap to an anchor point and attach the PFAS.
Maintenance, Cleaning, and Storage
Cleaning and Storage
Advises on cleaning with mild soap and water, and storing away from degrading elements.
Inspection Procedures
Pre-Use Inspection
Details what to look for during user inspections before each use, and conditions for removal from service.
Formal Inspection
Specifies that a Competent Person must perform formal inspections every 12 months and record them.
Inspection Log and Record Keeping
Inspection Log
Provides a template for recording formal inspections performed by a Competent Person.
Record Keeping
Instructions on using the inspection log/grid and ensuring accessibility of all inspection records.
Safety Information
General Safety Warnings
Highlights that regulations are not exhaustive and user judgment is crucial for safety.
Workplace Hazard Assessment
Requires assessment of workplace conditions and potential fall hazards by a Competent Person.
System Design and Usage
Covers fall protection system design, installation, forces on anchors, and user training.
User Precautions
Addresses user health, fitness, pregnant women, minors, and risks of suspension trauma.
Labels and Warnings
Product Labels
Details information found on product labels including part number, compliance, and capacity.
Warning: Never Connect to Closed Loop
A critical warning against connecting the equipment to a closed loop for safety.
Need help?
Do you have a question about the 10786 and is the answer not in the manual?
Questions and answers