Error Conditions - Braeburn Premier Series Installer Manual

7

Error Conditions

The zone panel continually monitors various components of the zone system and will display a message when the
following monitored conditions are detected.
High Plenum Temperature (PLENUM HI)
Displayed when the Plenum Temperature is exceeded during
equipment heating operation. The heating stage will be turned off
and the fan will be turned on until the plenum temperature returns
to the normal range. Service the system immediately to prevent
potential damage.
Low Plenum Temperature ( PLENUM LO)
Displayed when the Plenum Temperature is too low during
equipment cooling operation. The cooling stage will be turned off
and the fan will be turned on until the plenum temperature returns
to the normal range. Service the system immediately to prevent
potential damage.
13