Table of Contents
Advertisement
Instruction Manual
4.4 Programming & configuration
Programming and configuration of the device is accomplished via the push buttons and the diagnostic port.
While limited number of parameters can be configured using the push buttons, the diagnostics port (marked
(DIA) can be used to program all parameters and settings for the gauge at the same time. Furthermore, the
diagnostic port <DIA> allows communications of the pressure readings and all status information to a PC.
Diagnostic Port
A) Settings available via Push Buttons
•
SP1 & SP2 - Programming the setpoint threshold (setpoint value)
•
ADJ - Zero adjustment
B) Settings available via the Diagnostic Port
•
SP1 & SP2 - setpoint threshold
•
Setpoint relay switching characteristics
•
Setpoint hysteresis
InstruTech
Setpoint 2 & 1 push button
PCM301 Busy Bee
Zero adjustment
push button
Page 17
Advertisement
Table of Contents
Need help?
Do you have a question about the Busy Bee PCM301 and is the answer not in the manual?
Questions and answers