Table of Contents
Advertisement
Site requirements
Select an installation site that meets the detailed installation site
requirements described in the server user guide on the
Documentation CD and on the Hewlett Packard Enterprise website
(http://www.hpe.com).
Verifying the pallet contents
Item Name
1
BladeSystem c7000
Enclosure
Description
The HPE BladeSystem
enclosure
Item Name
2
Rear cage
3
Device bay blank
4
Power supply blank
5
Enclosure hot-plug
power supply (quantity
as ordered)
6
Full-height device
(quantity as ordered)
7
Half-height device
(quantity as ordered)
8
Local I/O cable
9
Fan blank
10
HPE Active Cool 200
Fan (quantity as
ordered)
11
Onboard Administrator
with KVM module
12
Onboard Administrator
with KVM blank
13
Interconnect blank
14
Interconnect module
(quantity and type as
ordered)
15
Onboard Administrator
with KVM tray
16
BladeSystem Insight
Display
17*
Power retention ties
(single-phase
enclosures only)
18*
Documentation CD
19*
Hard copy installation
instructions for blades,
options, and
interconnects
2
Description
The rear section of the
enclosure
A mandatory insert installed in
any unused device bay
A mandatory insert installed in
any unused power supply bay
The power supply for the
enclosure
The full-height server or
storage blade
The half-height server or
storage blade
A cable with serial, USB, and
video connectors that connects
to the I/O connector on the
front of a blade
A mandatory insert installed in
any unused fan bay
A fan used to cool the
components installed in the
enclosure
Hot-pluggable enclosure
management module. One
module is required to manage
the components installed in the
enclosure. To provide
redundant enclosure
management, you can install
an optional second module.
A mandatory cover installed in
any unused Onboard
Administrator bay
A mandatory insert installed in
any unused interconnect bay
Any of several components,
such as pass-thrus or switches
that enable communication
between the blade and the
enclosure
Hot-pluggable tray that houses
up to two Onboard
Administrator modules and
provides two enclosure link
connectors, the rear enclosure
UID, LED, and switch.
A display that provides
information about the health
and operation of the enclosure
Tie straps that help prevent
single-phase power cables
from disconnecting from the
power connectors
A CD containing detailed
documentation on using the
enclosure
The printed installation
instructions
Advertisement
Table of Contents
