Hd Audio Ports; Power Switch / Hard Disk Drive Led Connectors - Antec Signature Series User Manual

3.1 USB 3.0
Connect the front I/O panel USB 3.0 cable to a standard USB 3.0 connector on your motherboard.
Figure 28
3.2

HD Audio Ports

Connected to your front I/O panel there is an Intel® 10-pin HDA (High Definition Audio) connector. The pin assignments
for these connectors are as follows:
Figure 29
3.3

Power Switch / Hard Disk Drive LED Connectors

Figure 30
16 S10 User Manual
Connected to the top panel of the S10 are LED and Switch Leads for Power LED
and HDD LED activity. Attach these to the corresponding connectors on your
motherboard. Consult your motherboard manual for specific pin positions.
For LEDs, colored wires are positive (+). White or black wires are negative (–). If
the LED does not light up when the system is powered on, try reversing the
connection. For more info on connecting LEDs to your motherboard, see your
motherboard manual.
rev 1C