Usb 2.0; Ac'97 / Hd Audio Ports - Antec VSK-1000 User Manual

3.1

USB 2.0

Connect the front I/O panel USB cable to the USB header pin on your motherboard. Check the motherboard user's
manual to ensure that it matches the table below:
1 2
9 10
AC'97 / HD A
3.2
There is an Intel® standard 10-pin AC'97 connector and an Intel® 10-pin HDA (High Definition Audio) connector
linked to the front panel of the case.
You can connect either the AC'97 or the HDA connector, depending on your motherboard. Locate the internal audio
connectors from your motherboard or sound card and connect the corresponding audio cable. Consult your
motherboard or sound card manual for the pin-out positions. Even if your system supports both standards, only use one
connector.
Pin Signal Names
1 USB Power 1
3 Negative Signal 1
5
Positive Signal 1
7 Ground 1
9 Key (No Connection)
P
UDIO ORTS
Pin
1
2
3
4
5
6
7
8
9
10
Pin Signal Names
2 USB Power 2
4 Negative Signal 2
6
Positive Signal 2
8 Ground 2
10 Empty Pin
Signal Names
Pin
(HDA)
MIC2 L 1
AGND 2
MIC2 R 3
AVCC 4
FRO-R 5
MIC2_JD 6
F_IO_SEN 7
Key (no pin) 8
FRO-L 9
LINE2_JD 10
12
Signal Names
(AC'97)
MIC In
GND
MIC Power
NC
Line Out (R)
Line Out (R)
NC
Key (no pin)
Line Out (L)
Line Out (L)