Operations; Preset System; Navigating The Presets - GFI System Synesthesia User Manual

1.1 PRESET SYSTEM
SYNESTHESIA has 32 presets organized within 4 pages, where each page contains 4 banks, and each bank contains 2
patches (A & B).
A | B A | B A | B
Bank‐1 Bank‐2 Bank‐3
PAGE 1
You may set the maximum number of banks or pages to access. For example, restricting the preset access to two pages
gives you 2 pages x 4 banks x 2 patches = 16 presets.
Such restriction is useful if you are not using MIDI controller for preset switching as it could get unwieldy to navigate too
many preset locations in consequential manner.
Page restriction can be set in Global Settings menu.
1.2 NAVIGATING THE PRESETS
Load a Preset

Press footswitch A/Y to load patch A, or footswitch B/X to load patch B.
Load a preset in another Bank

Select the desired bank.

Press footswitch A/Y to load patch A, or footswitch B/X to load patch B.
There are 2 ways to scroll through the banks :
Method 1 : Press footswitch A/Y and B/X simultaneously (do not hold).
Method 2 : Twist the X encoder (clockwise for Bank‐Up or anti‐clockwise for Bank‐Down).
As you scroll through the banks the display will show the titles of both patch A and patch B that were stored in the bank,
and also the page number.
Chapter 1 ‐ OPERATIONS
A | B A | B A | B
Bank‐4 Bank‐5 Bank‐6
Preset title
>>My Preset
TRMOLO << PHASER
(DSP‐Y)
Algo name
Patch A title
Patch B title
A | B A | B
Bank‐7 Bank‐8
PAGE 2
\1
DSP‐X)
Algo name (
A>>Phantoms
B>>Vibro Lush
4
S Y N E S T H E S I A
A | B A | B
Bank‐13 Bank‐14
PAGE 4
Page #
/
Page #
2
User Manual
(Firmware V1.0.2)
A | B A | B
Bank‐15 Bank‐16