GFI System Synesthesia User Manual page 3

Every knob is also a button. The following operations can be done on each knob :
TURN
Here's a summary of what each knob and each switch does, this is just a quick reference, more detailed explaination
will be given in the next chapter.
In Preset Mode
 Push B/X ‐ Load patch B / Bypass.
A/Y ‐ Load Patch A / Bypass.
 Hold B/X > 500 ms ‐ initiates DSP‐X ramping.
A/Y > 500 ms ‐ initiates DSP‐Y ramping.
 Push A & B together ‐ Bank Up.
 Hold A & B together ‐ Switch to Stompbox mode.
PUSH or TAP
3
HOLD TWIST ( turn while holding down )
 Turn ‐ adjust primary parameters.
 Push ‐ set ramping speed.
 Hold ‐ map/unmap knob to expression pedal.
 Twist ‐ Adjust secondary parameters.
 Turn ‐ select algorithm.
 Push ‐ turn selected algorithm on / off.
 Hold X ‐ enter Options menu
Y ‐ enter Globals menu
 Twist X ‐ scroll through the preset banks.
In Stompbox Mode
 Push B/X ‐ turn DSP‐X on /off.
A/Y ‐ turn DSP‐Y on /off.
 Hold B/X > 500 ms ‐ initiates DSP‐X ramping.
A/Y > 500 ms ‐ initiates DSP‐Y ramping.
 Push A & B together ‐ Bank Up.
 Hold A & B together ‐ Switch to Preset mode.
User Manual
S Y N E S T H E S I A
(Firmware V1.0.2)