GFI System Synesthesia User Manual page 18

7.3 Library Update
Ocassionally a firmware or software update contains updated algorithms, in this case the algorithm library in the
pedal needs to be updated as well. To perform a library update :
1. Connect your pedal to a computer with SymmLab software installed.
2. Open SymmLab
3. Menu >> Library Update.
We will clearly state whether a library update is required whenever a firmware/software update is released.
Specifications :

Input impedance : 1 MOhm.

Output impedance : 500 Ohm.

DAC / ADC resolution : 24 bits.

Current consumption : ~240 mA.

Weight : 0.8 Kg (1.6 lbs).

Dimension : 12 (L) x 12 (W) x 5.5 (H) cm

Power source : 9VDC (negative center).
Key Features :

Dual‐channel multi‐modulation engines in a compact pedal.

32 presets.

Up to 30 on‐board algorithms.

Flexible DSP routing : Cascade, Mixtures, and LR‐Split.

Flexible mode : Preset Mode and Stompbox Mode

Flexible setup : Stereo Output or Pre/Post.

Multi‐Purpose A.C.E jack accepts Aux Switches, Control Voltage (CV), or Expression Pedal.

MIDI In and MIDI Thru.

Works with SymmLab® software for preset management, library update, firmware update, and factory reset.
 
Bright LEDs and LCD display.
Visit the product page at our website for more demo videos, sound clips, FAQs, and updates.
This product is designed and manufactured by :
Email : info@gfisystem.com (inquiry)
gfisys@gmail.com (support)
Web : www.gfisystem.com
GFI System
Jakarta, Indonesia.
18
User Manual
S Y N E S T H E S I A
(Firmware V1.0.2)