Factory Reset, Firmware Update, & Library Update - GFI System Synesthesia User Manual

Chapter 7 ‐ FACTORY RESET, FIRMWARE UPDATE, & LIBRARY UPDATE
7.1 Factory Reset
To revert the state of your pedal to factory setting :
1. Connect your pedal to a computer with SymmLab software installed.
2. Open SymmLab
3. Menu >> Factory Reset.
7.2 Firmware Update
1. Download the latest firmware updates at : www.gfisystem.com/downloads.html
For Mac users, please use Chrome or Firefox browsers to download the file, Safari browser for some reason
won't download the file correctly.
2. On power up, press and hold down both footswitches when "GFI SYSTEM" is displayed on the screen. Release
when the display reads "FIRMWARE UPDATE"
3. Connect the pedal to your computer's USB port via the supplied USB cable, and open the SymmLab software. This
window will pop up :
4. Rebooth the pedal (this is optional but recommended).
‐ DONE ‐
Almost always, a firmware update release is accompanied by an update of the editor software SymmLab as
well. Both firmware and software are pair‐matched, so make sure you get the latest version of the SymmLab
software when you do a firmware update.
Click to browse and load the file you've
just downloaded (file extension is .fdt).
After file is loaded, click this to start the
update.
17
User Manual
S Y N E S T H E S I A
(Firmware V1.0.2)