There are two ways Synesthesia can be used :
1. Stereo Out : Synesthesia as a mono‐in / stereo‐out pedal.
This is the basic configuration that is applicable to most usage scenarios.
2. Pre / Post : Synesthesia as a mono‐in / mono‐out pedal, plus the ability to switch between Pre or Post configuration.
OUTPUT
Some modulation effects sound best (subjectively!) when placed before OD/distortion, while some others may work
best when placed after OD/distortion. The Pre/Post configuration allows you to instantly switch the order of Synesthe‐
sia with respect to the other pedals placed within Synesthesia's effects loop (Send ‐ Return).
To use the Pre/Post setup :
1. Place the external pedal(s) in Synesthesia's effects loop.
2. Flip the switch at the top side to Pre/Post potition.
3. Select Pre or Post in Options menu ( Options ‐> Pre/Post ).
Pre/Post setting is specified on per‐preset basis.
Chapter 4 ‐ SETUPS : Stereo Out and Pre/Post
OUTPUT‐L
OUTPUT‐R
SYNESTHESIA
SEND
RETURN
SYNESTHESIA
INPUT
INPUT
12
User Manual
S Y N E S T H E S I A
(Firmware V1.0.2)