GFI System SYNESTHESIA Quick Start Manual

SYNESTHESIA
Parameter Controls [ DSP‐Y]

Speed / SP1

Depth / SP2

Tweak / SP3

Algorithm
SP = Secondary Parameter
Footswitch A/Y
LED A/Y
Every knob is also a button. The following operations can be done on each knob :
TURN
1. Preset System
SYNESTHESIA has 32 presets organized within 4 pages, where each page contains 4 banks, and each bank contains 2 patches (A & B).
A | B A | B A | B
Bank‐1 Bank‐2 Bank‐3
PAGE 1
You may set the maximum number of banks or pages to access. For example, restricting the preset access to two pages gives you
2 pages x 4 banks x 2 patches = 16 presets.
Such restriction is useful if you are not using MIDI controller for preset switching as it could get unwieldy to navigate too many
preset locations in consequential manner.
Page restriction can be set in Global Settings menu.
2. Global Settings and Options
2.1 Globals

Hold down the Y encoder until the screen reads "GLOBAL SETTINGS".

Use the Y encoder to navigate the Globals menu.
< to leave the menu without making any changes : hold down the Y encoder again until screen returns to the main scene >
2.2 Options
( specified on per‐preset basis )

Hold down the X encoder until the pedal enters the Options menu.

Use the X encoder to navigate the Options menu.
< to leave the menu without making any changes : hold down the X encoder again until screen returns to the main scene >
>>Melancholidy
TRMOLO ++ UNIVBE
PUSH or TAP
A | B A | B A | B A | B
Bank‐4 Bank‐5 Bank‐6 Bank‐7
PAGE 2
\1
HOLD TWIST ( turn while holding down )
A | B A | B
Bank‐8 Bank‐13
( firmware v1.0.2 )
QUICKSTART GUIDE
Parameter Controls [ DSP‐X]

Speed / SP1

Depth / SP2

Tweak / SP3

Algorithm
Bank [1, 2, 3, 4] indicator LEDs
Footswitch B/X
LED B/X
A | B A | B A | B
Bank‐14 Bank‐15 Bank‐16
PAGE 4