Operation; Troubleshooting - Hendi Tellano User Manual

Operation

• Caution! Never use the appliance without water.
• Do not fill with too much water.
• Fill the containers with the desired warm food .
• Connect the appliance with a suitable electrical
power supply.
• Switch ON the appliance by pushing the switch
button to the "I" position.
• Use the thermostat knob to set the desired tem-
perature. (Range of temperatures to 85 °C.)
Cleaning and maintenance
• Always unplug the appliance from the electrical
power supply and leave completely cool down be-
fore cleaning.
• If used intensively, regularly remove lime scale
from the bottom of the water tank.
• Never immerse the appliance in water or any oth-
er cleaning fluid.
• Clean the appliance with a damp cloth.

Troubleshooting

Problem
Appliance does not work
Appliance does not reach the set
temperature
Technical data
Voltage
Power
Max. capacity (litre)
Protection class
Remarks: Technical data is subjected to change without prior notification.
Possible cause
No power at the power point
The plug is not plugged (correctly)
into the power point
Heating element faulty
Control unit faulty
Heating element fuse faulty
204825 - Tellano 204832 - Tesino
900W
9
• Red indicator lights up.
• The appliance is now ready to keep the food
warm.
• Place the lid on the food container.
• Risk of scalding! Allow the water to completely
cool down before moving.
• Important! Always ensure that there is sufficient
water in the tank! Check this regularly, also dur-
ing use.
• Never use aggressive or corrosive cleaning
agents.
• Avoid as much as possible water contacting the
electrical components.
• Cleane after each use.
• Note: This appliance is not suitable for direct
washing by water jets.
Possible solution
Check the fuse
Check the plug
Contact the supplier
Contact the supplier
Contact the supplier
204900 - Pollina
230-240V~ / 50Hz
500W 850W
6,8
Class I
239902 - Savoi
1000W
9 6,8
EN
5