Maintenance And Cleaning - Westfalia 33 70 71 Instruction Manual

Maintenance and Cleaning

For best performance, always keep the saw blade and the reciprocating saw in
good order.

Before carrying out any work on the reciprocating saw, unplug the power plug
from the wall socket.

To clean the blade clamp, slightly pat the pivoting shoe of the reciprocating
saw on an even surface. To remove bigger cutting residue, clean the blade
clamp with a paintbrush of pressurized air.

Clean the housing with a cloth, a paintbrush or a brush to remove dust and
wood splinters. Keep the ventilation slots clean and opened. Do not allow
swarf to enter the ventilation slots.

Never use benzene or similar aggressive chemicals or abrasives for cleaning,
in order not to damage the reciprocating saw.

Make sure liquids of any kind cannot enter the reciprocating saw.

From time to time, check that all screws and parts of the reciprocating saw
are firmly secured.
Maintenance and Cleaning
15