EUROM Polar 70 Instruction Manual page 74

2. During the COOL process
During this process, water is extracted from the air. This largely evaporates, but
any excess water accumulates at the bottom water reservoir. When the water
reservoir is full, the airco will beep 8 times and the display will show P1. The motor
and the compressor will stop working, but not the fan.
Switch off the airco and remove the plug from the socket.
Move the airco to a drain location and empty the water reservoir by removing the
drain plug and connecting a hose. Make sure that as soon as the water reservoir is
empty, the drain plug is securely re-inserted to prevent leakage. The symbol P1
disappears. If the error recurs, contact your supplier.
Safety
The device is equipped with overheating protection, which switches off the airco
when it overheats. When this happens, you must remove the plug from the socket
and let the appliance cool down for at least 30 minutes. Eliminate the cause of the
remove the
drain plug
74
continuous
drain hose
bottom
drain plug