Installation - EUROM Polar 70 Instruction Manual

Installation

The Polar 70 / Polar 90 are portable air-conditioners and air dehumidifiers that can
be moved from one room to another.
 Remove the packaging material, keep it out of children's reach and make sure
that the appliance remains standing upright.
 Before use, check whether all the accessories are
present and whether the appliance and the
accessories do not show any damage. Do not
start using a damaged appliance, but return it to
your supplier!
 Place the appliance on a firm, even, dry and
horizontal surface close to a socket and drainage
possibility for warm air, for example, by a
window that can be slightly opened. Make sure
that the appliance has at least 50 cm free space
on all sides and observe all the directions stated
in the safety instructions.
 In addition to the accessories delivered with the
package, you will need the following for installing the appliance:
- Screwdriver (medium-size)
- Measuring tape or steel tape measure
- Scissors or knife and perhaps a saw to shorten the window frame girder in
very small windows
Connection piece
for window frame
girder
Window frame
girder A
Window frame
girder B
Plastic locking for
window frame
girder
Adhesive window
sealer (2x)
Adhesive window
sealer (2x)
62
Connection piece
for discharge in
wall
Wall sealing with
cap
Screw with plug
(4x) for wall
discharge
Condensate drain
hose
Power cable
bracket
Remote control
with batteries