EUROM Polar 70 Instruction Manual page 69

Using the buttons
Auto operation
Press on the MODE button to select auto.
1.
2. Press on TEMP
desired temperature.
3. Press on the ON/OFF button to start.
Remark:
* In the Auto mode, the airco can logically
select between cooling, fanning and
dehumidifying by detecting the difference
between the actual room temperature and
the temperature set in the remote control.
* In Auto mode, you cannot select the fan
speed; this occurs automatically.
* When the Auto mode is not comfortable,
then manually select COOL, DRY or FAN.
Cool and Fan operations
1. Press on the MODE button to select the COOL
or FAN function.
2. Press on TEMP
temperature.
3. Press on the FAN SPEED to select the fan
speed AUTO-HIGH-LOW.
4. Press on the ON/OFF button to start.
Remark:
In the FAN function, the set temperature is not
visible on the display of the remote control. Also
the temperature cannot be regulated. Only steps
1, 3 and 4 can be executed.
or to set the
or to set the desired
69