4. GENERAL BED OPERATION – Continued
4.3.1 Side Rail Safety Lock Indicator
The side rail locating pin has a yellow coating that allows for visual inspection of the
locking device. When the side rail is in the raised position, viewing the release knob from
the side there should be no yellow shaft visible. If there is yellow shaft visible the safety
side is NOT securely locked in the upright position and needs to be adjusted.
The yellow coating should NOT be visible from above when the safety side is correctly
locked in position.
Unlocked
Side rail release and lock knob shown in unlocked and locked positions
•
After adjustment of the side rail visually check the locking pin location. There
should be no yellow shaft on the locking pin visible if locked correctly.
•
DO NOT use other manufacturer's side rails on the CS8 bed.
WARNING
Page | 11
Locked