Transportation And Storage - Invacare CS8 User Manual

8. MAINTENANCE - Continued
-continued
SIDE RAILS
If the yellow shaft is visible when the side rail is in the raised and locked
3
position, contact Invacare for service advice.
Check that the rails pivot axles are securely fitted to the bed. The pivot axles are
locked into place by the manufacturer using a 10mm lock nut. It is rare that
4
Re-tightening of the axles would be required, but in the case that it is, ensure
that the nut is not over tightened during the tightening procedure.

9. TRANSPORTATION AND STORAGE

Handle With Care.
The CS8 bed should be stored in a clean, dry, well ventilated area.
Do not drop and avoid shock, or violent impact when transporting.
The following limits apply during transport and during a storage period of up to
15 weeks duration:
Ambient temperature
Relative humidity
Air pressure
The following limits apply to normal operating conditions and for periods of
storage longer than 15 weeks:
Ambient temperature
Relative humidity
Air pressure
-25°C To
10% To
50 kPa To
+10°C To
30% To
70 kPa To
Page | 16
+70°C
75%
106 kPa
+40°C
75%
106 kPa