Installing A Lockout Device - Thermo Scientific Dionex Operator's Manual

H.1.2

Installing a Lockout Device

1. Open the lockout device and insert the power connector into the
device (see
Figure H-4. Insert Power Connector into Lockout Device
2. Close the lockout device and slide the cover so that the padlock holes
are lined up between the cover and the base (see
3. Insert a padlock (see
one padlock.)
Figure H-5. Close Lockout Device and Attach Padlock
Doc. 065250-06 03/2020
H • Lockout Instructions for the AE, SP, or SS
Figure H-4).
Figure
A
Figure
H-5, View B). (You can use more than
B
H-5, View A).
205