Thermo Scientific Dionex Operator's Manual page 170

Dionex Integral Systems Operator's Manual
Install the 25-Pin D-Sub Connector Inserts
1. Lift the lid on the cap that covers one
of the two TTL and relay openings on
the top of the AE (see
2. Remove the screws that attach the cap
to the AE and remove the cap.
3. Install either the female (relay) or
male (TTL) 25-pin D-sub connector
insert into the empty TTL and relay
opening, and secure the insert with
screws.
connector insert installed.
4. Repeat
other connector insert.
158
Figure
Figure C-7 shows the relay
Step 1 through Step 3
C-6).
Cap with
lid open
for the
Figure C-6. Top of AE: TTL and Relay
Openings with Caps
Figure C-7. Connector Insert Installed
Doc. 065250-06 03/2020