Meter Settings - Spectrum Technologies Field Scout 2266FS Product Manual

Meter Settings

Accessing the Setup Screen
Power on the tester. Press the MENU/▼ button. The
meter will briefly display the Key Info screen before
transitioning to the Setup screen. Follow the
instructions for the specific parameter that is to be
modified. Pressing the Cal/Esc button will return you
to the measurement screen.
Measurement Parameter
1. Press MENU/▼ to scroll to Measurement option.
2. Press HOLD. The display shows Cond, TDS and
Salinity.
3. Use the MENU/▼ button to toggle between Cond,
TDS and Salinity. Press HOLD to select desired
option.
4. The display shows the selected parameter with a
checkmark and returns to the Setup screen.
TDS Factor
1. Press MENU/▼ to scroll to Settings option.
2. Press HOLD. The display shows TDS factor and
Backlight.
3. Use the MENU/▼ button to scroll to the TDS
Factor option
4.Press HOLD. Current adjustment factor will be
displayed.
5.Adjust the setting with the MENU/▼ button. Note
that the setting can only be adjusted down. The
value will flip to 1.00 after you scroll past 0.40.
6. Press HOLD to confirm the TDS factor setting.
The display shows the TDS factor with a check mark
then returns to the Setup screen.
6