Indicator Description - Samsung WISENET BabyView User Manual

Indicator Description

a b c
No. Icon Name
Signal
a
Indicator
Digital Clock
b
Camera
c
Number
Sound level
d
10 · Getting Started
SEW-3053W-170117.indd 10
d e fghi j k
l
Description
Shows the strength of the signal being received
from the camera.
If an 'x' shows up on the signal bar, then the
system is "out of range".
Displays the time that is set on the monitor.
Indicates which camera is being displayed on the
current screen.
Indicates the sound level of the Active Camera.
No. Icon Name
Indicates remote monitoring status. When
Remote
remote monitoring is turned on, the camera
e
monitoring
works in dual mode(RF & Wi-Fi).
No SD card
SD card
SD card is not supported or has
f
status
insufficient storage.
SD card installed
Zoom mode Indicates Zoom mode. x1/x1.5/x2
g
Indicates that the camera's night vision mode is
Night Vision
h
on.
Vox on/off
Indicates whether the VOX function is On/Off.
i
condition
Monitor
Speaker Indicates the monitor's speaker is muted.
j
Mute
Fully Charged
Charging
Battery Power
(If the battery fully charged, above 2
k
Level
icons show alternately)
Low Battery
Two-way talk
Press the [
l
No Signal Warnings
The "Out of Range" message means the monitor cannot access the camera.
Please reposition the camera, or check the camera power.
When your baby monitor displays the "Out of Range" message, please move the baby
monitor closer to the camera.
Description
] icon while talking.
2017/1/17 14:41:10