Trouble Shooting; Product Specification - Samsung WISENET BabyView User Manual

Table of Contents

Advertisement

Available languages

Available languages

t
s
rouble
hootIng
Problem
No picture from a
1. Check all connections to the camera. Make sure the adapter is plugged in.
camera
2. Make sure that the cameras and monitor are both ON.
3. Make sure that the camera is in range of the monitor.
4. Make sure the camera and monitor are paired.
5. Adjust the monitor antenna to a vertical position.
The picture is or has
The picture may become choppy when experiencing a lower frame rate
become choppy
(i.e. 10 frames per second vs. a higher 20 frames per second).
1. Try moving the camera closer to the monitor.
2. Remove obstructions between the monitor and camera.
3. Adjust the monitor antenna to a vertical position.
No sounds (even with
1. Make sure that the power adapter is connected to the camera.
both units turned on)
2. The battery on the monitor may be dead, be sure to charge it using the
adapter included.
3. The monitor may be out of range from the camera; be sure to check it the
Range LED in on continuously.
Your BrightVIEW is
emitting an high
This sound is normal feedback which occurs if the monitor and camera are too
pitched noise/
close together. Move them further apart.
feedback.
Monitor screen is
Restart your monitor and check the connection to the camera. If the baby monitor
frozen.
displays the "Out of Range" message, move the monitor closer to the camera.
Low batteries will cause the supply current to become unstable and will affect the quality
`
n
of the video/audio. Please charge the battery fully for use for superior video.
16 · How to Install
SEW-3053W-170117.indd 16
Solution
P
s
roduct
PecIfIcatIon
Item
System General
Operating Frequency Range
2.4GHz (Wi-Fi), 2.4GHz (FHSS)
17dBm(FHSS)/802.11b 11Mbps: 18+/-1dBm 802.11g 54Mbps:
Transmitting Power
16+/-1dBm 802.11n 135Mbps: 15+/-1dBm (Wi-Fi)
-88dBm (FHSS)/135M: -68dBm @10%PER;54M: -74dBm
Monitor Sensitivity
@10%PER;11M: -89dBm@8%PER (Wi-Fi)
Type of Spread Spectrum TX
FHSS , Wi-Fi
FHSS (GFSK)/802.11b FHSS(CCK,DQPSK,DBPSK),802.11g/n: OFDM
Type of Modulation
(BPSK,QPSK,16-QAM,64-QAM)
FHSS (4Mbps), Wi-Fi (802.11b: 11,5.5,5.1Mbps;802.11g:
Data Rate
54,48,36,24,18,12,9,6Mbps;802.11n: 150Mbps Max)
RF Only 900 ft (Line of Site)
Transmission range
*The transmission range of the wireless signal may weaken according
to your environment.
Wireless Camera
Image Sensor Type
1/4" Color CMOS Image Sensor
Effective Pixel
H: 1280, V: 1024
High : MAX 1.7 Mbps(~10fps@1280x720),
Resolution
Low : MAX 0.7 Mbps(~10fps@704x480)
Image Compression
MPEG4
Max.Framerate
20fps @704x480
Streaming Capability
Uni
IP
IPv4
Protocol
UDP, RTSP, NTP, DHCP, HTTP
Streaming Method
Unicast
4 Users
Max. User Access
* The number of available concurrent users for a single camera may
vary depending on the speed of your Wi-Fi router.
Details
2017/1/17 14:41:20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wisenet sew-3053w

Table of Contents