Table of Contents
Advertisement
Quick Links
LIST OF PRODUCTS
*
UL Approved Digital Multimeter
Digital AC & AC/DC Clampmeter
*
Transistorised Electronic Analog &
*
Digital Insulation Resistance Testers
*
Earth Resistance Testers
*
Digital Sound Level Meter & Sound Level Calibrator
*
Digital contact & Non-contact Type Tachometer
*
Digital Non-contact (infrared) Thermometer
*
Thermo Hygrometer & Thermo Anemometer
*
Wood / Paper / Grain Moisture Meter
*
Distance Meter
*
Digital Hand Held Temperature Indicators
*
Digital Lux Meter
*
Power Factor Regulator
*
Maximum Demand Controller/Digital Power Meter
*
Gas Analysers
*
Calibrators
*
Laboratory Instruments
*
Phasing Sticks
*
500KV High Voltage Non contact detector.
*
Transducers & Transmitters
*
Programmable Panel Meters
17, Bharat Industrial Estate, T. J. Road, Sewree (W),
Mumbai-400015. INDIA
Sales Direct: 24156638, 27754546 Tel.:(022)24124540, 24181649, 27750662
E-mail : sales@kusam-meco.co.in, Website : www.kusamelectrical.com
OPERATION
MANUAL
20-10-2020
DIGITAL
MULTIMETER
5040
Advertisement
Table of Contents
Related Manuals for Kusam-meco 5040
Summary of Contents for Kusam-meco 5040
- Page 1 Phasing Sticks 500KV High Voltage Non contact detector. Transducers & Transmitters Programmable Panel Meters OPERATION 17, Bharat Industrial Estate, T. J. Road, Sewree (W), MANUAL Mumbai-400015. INDIA Sales Direct: 24156638, 27754546 Tel.:(022)24124540, 24181649, 27750662 E-mail : sales@kusam-meco.co.in, Website : www.kusamelectrical.com 20-10-2020...
- Page 2 “burn them out” if you incorrectly connect your DMM to a circuit or have the 5040 DMM on wrong setting, you damage the meter and possibly hurt yourself. You can also get into trouble if you try to measure the voltage across a charged capacitor.
-
Page 3: Table Of Contents
“Safety Information” and “Rules for Safe Overview..........1 Operation”carefully before using the Meter. Unpacking Inspection......2 Digital Multimeter Model - 5040 / 5040-T (hereafter SPECIFICATIONS referred to as “the Meter”) is a 3-4/5 digits Multimeter with steady operations, and highly reliable hand-held General Specifications...... -
Page 4: Unpacking Inspection
SPECIFICATIONS : Unpacking Inspection GENERAL SPECIFICATIONS : Open the package case and take out the Multimeter. Display :3-4/5 digits 5000 counts LCD display Update rate : Check the following items carefully to see any missing 52 Segments Bargraph : 60 per second nominal or damaged part : Digital Data : 5 per second nominal;... -
Page 5: Electrical Specifications
AC VOLTAGE (40Hz - 500Hz) Overload Protections : : 1A/600V, IR 10kA or better, F fuse; mA&mA Range Accuracy Resolution 50 mV : 10A/600V, IR 100kA or better, F fuse ±(0.8% rdg + 3 dgts) 500 mV : 1050Vrms, 1450Vpeak; : 600VDC/VAC rms ±(1.0% rdg + 4 dgts) W &... -
Page 6: Ac Current
RESISTANCE AC CURRENT Range Accuracy Burden Voltage Resolution Range Accuracy Resolution +(0.3% rdg + 6 dgts) 0.01 50Hz -- 60Hz +(0.1% rdg + 3 dgts) 0.15mV/mA 500.0 mA 0.1 mA ±(0.6%rdg + 3dgts) +(0.1% rdg + 2 dgts) 5000 0.15mV/mA 500 KW 50.00 mA 0.01 mA... -
Page 7: Diode Test & Continuity
AUDIBLE CONTINUITY TESTER Rules For Safe Operation (1) Audible threshold between 20W and 200W Warning Response time < 100ms To avoid possible electric shock or personal injury, and to avoid possible damage to the Meter DIODE TEST or to the equipment under test, adhere to the following rules : Range 2.000 V... -
Page 8: Safety
Use the proper terminals, function, and range for Safety your measurements. This manual contains information and warnings that Do not use or store the Meter in an environment must be followed for operating the instrument safely of high temperature, humidity, explosive, and maintaining the instrument in a safe operating inflammable and strong magnetic field. -
Page 9: International Electrical Symbols
(mA, mA, A) functions. Double Insulation or Reinforced insulation 6) Common (Ground reference) Input Jack for all functions Fuse 7) Input Jack for milli-amp & micro-amp current Functions. AC--Alternating Current 8) Optical cable to connect DMM 5040 to PC. DC--Direct Current... - Page 10 Analog bar-graph Crest Factor The analog bar graph provides a visual indication of Crest Factor is the ratio of the Crest (instantaneous measurement like a traditional analog meter needle. It is peak) value to the True RMS value, and is commonly excellent in detecting faulty contacts, identifying used to define the dynamic range of a true RMS DMM.
-
Page 11: Measurement Operation
Capacitance Diode test function MEASUREMENT OPERATION Default at Press SELECT button momentarily DC Voltage, AC Voltage, Hz Frequency to select Diode test function. functions mV function defaults at DC. Press SELECT button momentarily to select AC. Caution Press the Hz push button momentarily to activate Discharge capacitors before making any and to exit Hz. - Page 12 Resistance, Continuity functions inputs for calibration. The display shows “Shrt”. Default at W. Press SELECT button momentarily to Simply short the leads for about 3 seconds until the select Continuity function which is convenient for display shows zero, then the resistance in the leads checking wiring connections and operation of and in the internal protection circuitry of the meter is switches.
-
Page 13: Functional Buttons
Phase to earth voltage. To avoid exceeding the FUNCTIONAL BUTTONS voltage rating of the protection fuse(s) accidentlly, Backlighted display always consider the phase to phase voltage as the Press the SELECT button for 1 second or more to turn on and off the display backlight function. The working voltage for the protection fuse(s) backlight will also be turned off automatically after 30 second to extend battery life. -
Page 14: Maintenance
Mannual or Auto-ranging Maintenance Press the RANGE button momentarily to select manual-ranging and the meter will remain in the Warning range it was in, the LCD annunciators AUTO turns To avoid electrical shock, disconnect the meter from off. Press the button momentarily again to step any circuit, remove the test leads from the input jacks through the ranges. -
Page 15: Warranty
WARRANTY Battery and Fuse replacement Battery use: Each “KUSAM-MECO” product is warranted to be free from Single 9V battery NEDA1604, JIS006P or IEC6F22; defects in material and workmanship under normal use & 9V alkaline battery NEDA1604A, JIS6AM6 or IEC6LF22 service. The warranty period is one year (12 months) and Fuses: begins from the date of despatch of goods.
Need help?
Do you have a question about the 5040 and is the answer not in the manual?
Questions and answers