Direct Mode Monitoring - Motorola BLINK1 User Manual

4. Direct Mode Monitoring
4.1 Turn ON the camera with the slide switch.
The Green LED on the camera front panel will be turned on and start to
blink after 45 sec. After 90 sec, it turns into the Direct Mode and waits
for the Parent handset unit to connect. Then the Green LED will blink
every 2 sec. Duration of blink is 200ms.
If the Camera is already set to Router mode in the past, it needs to reset
to Direct Mode by press-and-hold the RESET button on the bottom
cabinet for 10 seconds until you hear the double beep confirmation tone.
4.2 Turn on the MBP2000 Parent unit. In the Home
Screen, select the Apps Baby Monitor.
12

Direct Mode Monitoring