Table of Contents
Advertisement
For specifications, available models, and technical data please refer to the AQUA Link TECHNICAL BOOKLET.
CONFIGURATIONS
EXAMPLE OF A CONFIGURATION
1: series
2: size
3: pumps set-up to the primary circuit
4: pumps set-up to the secondary circuit
5: model
6: any silenced model
7: glycol percentage
The possible values for each digit of the alpha-numerical identification code of the unit can be the following:
1: AQUA Link
2: 110 / 140 / 220 / 300 (It shows the indicative power range of the combined chiller in kW)
3: 1P / 2P / 1PM / 2PM (number and type of primary circuit pumps; M= Oversized)
4: 1P / 2P / 1PM / 2PM (number and type of secondary circuit pumps; M= Oversized. The number of secondary circuit
pumps, if available as accessories, must be in line with the number of the primary circuit pumps)
5: IN (for indoor models) / OD (for outdoor models)
6: blank / LN (any silenced models. If it is a standard model, the relevant field will not be filled in. Silenced models are only
available for indoor installation, as it is provided with containment panelling as an accessory)
7: NG /digit between 20 and 40. It shows the glycol percentage expected on the primary circuit. The acronym NG stands for
no glycols in the primary circuit.
EXAMPLE OF UNIT CLASSIFICATION
SERIES: AQUA Link
SIZE: 140
Power to UTA
20%
30%
40%
Power to UTA
80%
70%
60%
AQUA Link
1
AQUA Link
140
SETTING UP PRIMARY CIRCUIT
PUMP: 1 standard head pump
GLYCOL VERSION
Power to Chilled Beams
NO GLYCOL VERSION
Power to Chilled Beams
140
1P 1PM
2
3
4
1P
1PM
IN
SETTING UP OF SECONDARY CIRCUIT
PUMPS: 1 oversized head pump
5
80%
70%
60%
20%
30%
40%
IN
LN
30
5
6
7
LN
30
GLYCOL PERCENT
30% glicole
SILENCED VERSION
Accessory for indoor models only
INDOOR MODEL
Advertisement
Table of Contents
