Table of Contents
Advertisement
The connection between different units is created by connecting control modules (IQ-nomic) together as shown in wiring
diagrams.
The AQUA Link hydraulic module is equipped with inverter technology to adjust the rotation speed of the pumps contained in
it.
4. SAFETY MEASURES
The machine complies with Directives 2006/42/EC, 2004/108/EC, 2006/95/EC, 97/23/EC and applicable Technical
Standards as specified in the Declaration of Conformity which is an integral part of this manual.
4.1
DEFINITION OF A DANGEROUS AREA
The machine must be accessed only by authorised operators.
–
The outdoor danger area is identified by a space of about 2 metres around the machine. Access to this area should
be forbidden by a special protection if the unit is placed in an unprotected place, easily accessible by unqualified
staff.
–
The indoor danger area can be accessed through the machine. Under no circumstances should access inside the
machine be allowed to unqualified personnel and before cutting power.
4.2 SAFETY PROVISIONS
All units are designed and built to comply with the Pressure Equipment Directive (97/23CE) to ensure the maximum level of
safety. Comply with the provisions below to prevent possible risks:
This product contains pressurised containers, live components, moving mechanical parts, hot and cold surfaces that could
pose a hazard in certain situations: any operation must be performed by qualified personnel who have the necessary
qualifications according to current regulations. Make sure that the appointed personnel fully understand the documentation
supplied with the unit before carrying out any operation;
–
The operations described in this manual must be supplemented with the procedures included in the user instruction
manuals of other systems and devices incorporated in the machine. The manuals contain all the information to
safely manage devices and operating modes;
–
Use proper protection (gloves, helmet, goggles, safety shoes, etc.) for any maintenance or control operation
performed on the unit;
–
Do not wear loose clothing, ties, necklaces, watches, etc., that can get caught in the machine moving parts;
–
Always use tools and protective equipment in excellent condition;
–
Do not operate in the exhaust path of the safety valves;
–
The system user must consult the installation and use manuals of the systems incorporated and attached to this
manual;
–
There may be potential risks that are not evident. Warnings and instructions are therefore provided in the machine.
It is forbidden to remove warnings.
The unit must be loaded with a mixture of water and ethylene glycol. The glycol percentage must be consistent with that
envisaged in the order, and may vary between 20% and 40%. For the safety data sheet of this product, please refer to the
one supplied by the glycol manufacturer
It is forbidden to:
–
remove or make safety guards ineffective;
–
tamper with and/or change, even partially, the safety devices installed on the machine.
–
In case of alarm and consequent operation of safety devices, the operator must require the immediate intervention
of qualified maintenance technicians. Any accident can lead to serious injury or death.
–
Safety devices must be checked according to the directions given in the attached instruction manuals. Inspections
must be performed by personnel authorized be the employer through a written document of assignment. A copy of
the results of the checks should be left on the machine or near it. Any accident can lead to serious injury or death.
The manufacturer assumes no liability for damage/injury to people, pets or property resulting from the re-use of single parts
of the machine for assembly situations or functions different from the original ones. It is forbidden to tamper with/replace one
or more parts of the machine without authorisation.
The use of accessories, tools or consumables other than those recommended by the Manufacturer relieves the latter from
civil and criminal liability.
The machine decommissioning and demolition should be entrusted only to properly trained and equipped personnel.
16
Advertisement
Table of Contents
