Advertisement
Output filter mode
Delay for F.O.
Minimum output pulse
Disabled by setting value 0
Displayed if associated with at least one output
Fault action
(in case of indication)
Er, br
The input value and alarms are frozen while the logic input is active.
With the logic input active, a reset turns OFF both the relay outputs and the alarms latch.
Input value is sampled; state of alarms is not transferred to outputs; outputs are "frozen".
When the logic input is active the input value is "frozen" and the outputs are updated according to the calculated alarms
state, including the ones latched.
81661G_MHW_40A48-96_09-2016_ENG
0 not active: calculated status
is sent directly to relay
1 On delay (DON)
2 delay in activation of
output after output
is turned off (DBI)
3 Off delay (DOF)
4 Delay for activation
only at power-up
(DPO)
+ 8 time base max. 99 min (default = 99 sec)
0 to 99 min or sec
0 to 99 sec
Value Output 1 Output 2 Output 3
0
OFF
OFF
OFF
1
ON
OFF
OFF
2
OFF
ON
OFF
3
ON
ON
OFF
4
OFF
OFF
5
ON
OFF
6
OFF
ON
7
ON
ON
• HOLD function
• FLASH function
P r
+4 to disable In and Ou pages
+8 to disable Cf page
+16 to enable 0 offset memorization
+32 base configuration (the following parameters will not be displayed:
In: Ft, Fd, Of, L_L, H_L
Ou: On [forced to no. outputs present], rE)
U.C.
U. C.
1
Calibration of
minimum (*)
ON
ON
ON
Calibration of
ON
maximum (*)
• Protection
Value
Displayed
parameters
Protection code
0
o.1, o.2, o.3
1
o.1, o.2
2
o.1
3
o.1
• User Calibration
CPU A Function
analog retransmission
output
(*) when U.C. = 1 press keys
analog output
Modifiable
parameters
o.1, o.2, o.3
o.1, o.2
o.1
none
to calibrate
Δ ∇
5
Advertisement
