GB
2
INTRODUCTION
2.1
General
MechTrac is a motor driven gantry for use together with ESAB's A2 welding
equipment and power sources (LAF/TAF).
The control of the travel motor takes place over the PEK control unit where the de-
sired speed can be set.
For more information regarding the PEK see instruction manual
0460 948 xxx, 0460 949 xxx, 0459 839 036.
2.2
Technical data
Travel speed :
Maximum load :
Standard rail length :
Equivalent continuous A--weighted noise pressure is below 70 dB (A).
fob2d1ea
0.2 -- 2.0 m/min
220 kg
3 m
- - 8 - -