Operation; Heat And Blower Levels - Silvercrest SHAC 2400 C2 Operating Instructions Manual

WARNING! RISK OF PERSONAL INJURY!
Do not take the hair dryer into use if it has fallen down or
►
is damaged in any way . Arrange for the appliance to be
checked and/or repaired by qualified technicians .
Do not cover the air intake grill while operating the appliance .
►
Clean the grill at regular intervals .
The hair dryer becomes hot when it is in use . Hold it only by
►
the grip when it is hot .

Operation

Heat and blower levels

NOTICE
► Run the hairdryer at the highest blower and heat levels for about 2–3 minutes
before first use . This helps to remove any production residues that may remain
in the interior of the appliance .
1) Insert the plug into a power socket .
2) Switch the hair dryer on with the blower level switch 3 .
The hair dryer is fitted with two function switches . With these you can separately
select the strength of the air flow (blower level switch 3) and the level of heat
(heat level switch 4):
Blower levels
0
Heat levels
3) After use, switch the appliance off in that you place the blower level switch 3
into position "0" . Then remove the plug from the wall socket .
■ 6 │ GB │ IE │ NI │ CY
The hair dryer is switched off
reduced air flow
full power air flow
low heating level
medium heat level
high heating level
SHAC 2400 C2